Differences

This shows you the differences between two versions of the page.

--- 2gtimingin1gecu [2008/01/24 07:23]
twdorris
+++ 2gtimingin1gecu [2024/03/15 11:16]
@@ Line 1: / Line 1: @@
-====== 2G Timing in a 1G ECU ======
-The 1G ECU timing tables provides for a LOT of ignition advance.  Many people think it's too much even for a standard 1G engine.  But when increase compression or stroke, you may find that it's *WAY* too much.  A number of people running 8.5:1 pistons from a 2G in their 1G have asked for settings in DSMLink to basically convert their 1G timing map to a 2G.
-====== Details ======
-The basic table to convert a 1G timing map into a 2G using DSMLink's Timing dialog is listed below.
-^ RPM | 1000| 1500| 2000| 2500| 3000| 3500| 4000| 4500| 5000| 5500| 6000| 6500| 7000| 7500| 8000|
-^ Adj |   -1|   -8|  -12|   -8|  -10|   -8|   -8|   -7|   -6|   -7|   -6|   -1|    0|    0|    0|
-Note that DSMLink timing adjustments are active all the time, not just at wide open throttle.  So I probably would not run the timing values listed above below, say, 3500 RPM.  I might actually use something more like this.
-^ RPM | 1000| 1500| 2000| 2500| 3000| 3500| 4000| 4500| 5000| 5500| 6000| 6500| 7000| 7500| 8000|
-^ Adj |    0|    0|   -2|   -2|   -3|   -4|   -8|   -7|   -6|   -7|   -6|   -1|    0|    0|    0|

ECMTuning - wiki