====== How-To's ======
This page is a collection of how-to's from those that have-done.  


===== Hardware =====

  * [[SwapPlugWires|2G plug wire swap]] - Installing DSMLink in a car without a '95/'96 style cam angle sensor
  * [[90ClutchCut|Clutch cut wire on a '90 DSM]] - Installing a clutch cut (NLTS) wire in a 1990 DSM
  * [[NitrousControlWiring|Basic "nitrous" controls]] - The basics of wiring up a solenoid to be control by DSMLink's "nitrous" controls
  * [[NitrousControlDetails|"Nitrous" control specifics]] - More specific information about DSMLink's control of the FPR solenoid output
  * [[UseNitrousControlsForDejonToolBOVMod|"Nitrous" control used for BOV bypass mod]] - Describes one alternative use of DSMLink's "nitrous" controls
  * [[InstallNewSensor|Install a sensor for datalogging]] - Describes how to use a non-factory sensor for datalogging (e.g., a boost sensor, a wideband kit, etc.)
  * [[boostcontrol|ECU-based boost control]] - All the information you need to enable boost control from inside the ECU.
  * [[sdsetup|Speed Density Setup]] - Information on setting up your system for speed density operation

===== Tuning/dial-in =====

  * [[BasicFuelAdj|Changing injectors]] - Describes how to adjust DSMLink for different injectors
  * [[v3mafadjcombft|General MAF calibration]] - How-to on general MAF calibration with the V3 application
  * [[MAFTCalibrationByWBO2|MAFT Calibration using a WBO2]] - Describes how to calibrate a MAFT output using a WBO2
  * [[MAFTCalibrationByLoggedBoost|MAFT Calibration using a boost sensor]] - Describes how to calibrate a MAFT output using a boost sensor
  * [[CreateVolumetricEfficiencyMap|Customize the VE table for your setup]] - Create a VE table more suited to your specific setup
  * [[v3tpsadj|How to dial in TPS/idle switch]]


===== Direct Access =====
  * [[Direct Access changes]] - Describes how to add custom changes to Direct Access