Table of Contents

Creating an ECMLink application debug file

In some debugging situations, it's necessary to collect more information from a customer's runtime environment. You do that by increasing the debug level in our logging system. Doing so dramatically increases log volume, though. So you do not want to leave the configuration in this state permanently.

Usage

To create a fresh applog.txt file:

  1. Exit the ECMLink application
  2. Edit the logging.properties file (more details below)
  3. Start the ECMLink application
  4. Recreate the problem you were having
  5. Exit the ECMLink application
  6. Grab the applog.txt file and edit/post it up on our forums
  7. Edit the logging.properties file and undo the changes you made above

logging.properties file

Locate the logging.properties file in the installation root directory. Under Windows, this will typically be:

C:\Program Files\ECMLink

You should find a file there that has a section that looks something like this.

############################################################
# Facility specific properties.
############################################################
.level = WARNING
com.ecmtuning.ecmlink.level = FINE

If you are running Windows Vista, you'll need to be running as administrator to be able to edit the logging.properties file.

Basic device data

Now there are a couple choices to make. If you want a reasonably manageable log file and you're just having basic communication problems, then just add the following line to the end of that file.

com.ecmtuning.ecmlink.device.ecmlink.level = FINER

You can change that FINER to FINEST if you want to log more debugging data related specifically to the ECMLink connection process. But be forewarned that this file will be *megabytes* in size and can cause the application to slow down substantially. I would not recommend attempting to datalog while logging is set to FINEST.

Full-blown debug data

If you want to turn on full-blown debugging to get all SORTS of information about application initialization, configuration files, communication bytes, etc., etc, then change the existing line in the logging.properties file to read:

com.ecmtuning.ecmlink.level = FINEST

But be forewarned that this file will be *megabytes* in size and can cause the application to slow down substantially. I would not recommend attempting to datalog while logging is set to FINEST.

applog.txt file

Under Windows, you can find the applog.txt file here:

%userprofile%\ecmlink\applog.txt

You can actually just type that directly into a file browser (like while you're trying to attach to an e-mail or forum post) and Windows will automatically load it up.

The specific location when running under Windows XP is:

C:\Documents and Settings\<username>\ecmlink\applog.txt

When running under Windows Vista/7, the debug file can be located in the following directory:

C:\Users\<username>\ecmlink\applog.txt