User Tools

Site Tools


bcschoice

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
bcschoice [2010/08/23 16:13]
twdorris
bcschoice [2024/03/15 11:16] (current)
Line 10: Line 10:
  
 ===== Ingersoll-Rand (3-port) ===== ===== Ingersoll-Rand (3-port) =====
-{{  ​http://​www.ecmtuning.com/​wiki/​_media/​ingersollrand-3nipple.png}}+{{  ​https://​www.ecmtuning.com/​wiki/​_media/​ingersollrand-3nipple.png}}
 The one 3-port solenoid that we've tested to work well without any modification or restrictor setup is made by Ingersoll-Rand. ​ It's Aro model number P251SS-012-D. ​ You can find this solenoid on [[http://​www.grainger.com/​Grainger/​INGERSOLLRANDARO-Solenoid-Valve-6JJ52|Grainger'​s site]] by searching for that part number or Grainer'​s part number 6JJ52. The one 3-port solenoid that we've tested to work well without any modification or restrictor setup is made by Ingersoll-Rand. ​ It's Aro model number P251SS-012-D. ​ You can find this solenoid on [[http://​www.grainger.com/​Grainger/​INGERSOLLRANDARO-Solenoid-Valve-6JJ52|Grainger'​s site]] by searching for that part number or Grainer'​s part number 6JJ52.
  
Line 17: Line 17:
  
  
-[[http://​www.ecmtuning.com/​product_info.php?​cPath=28&​products_id=54|Boost Control Solenoid]]+[[https://​www.ecmtuning.com/​product_info.php?​cPath=28&​products_id=54|Boost Control Solenoid]] 
  
 ===== Factory Boost Solenoid (2-port) ===== ===== Factory Boost Solenoid (2-port) =====
-{{  ​http://​www.ecmtuning.com/​wiki/​_media/​stockbcs.png}}+{{  ​https://​www.ecmtuning.com/​wiki/​_media/​stockbcs.png}}
 The factory boost control solenoid (BCS) does actually work, but it's only a 2-port solenoid. ​ Which means you'll need to wire it up with a restrictor (we've found that a 0.025" restrictor works well) similar to the stock configuration and you'll need to remove the internal restrictor found in the stock BCS itself. The factory boost control solenoid (BCS) does actually work, but it's only a 2-port solenoid. ​ Which means you'll need to wire it up with a restrictor (we've found that a 0.025" restrictor works well) similar to the stock configuration and you'll need to remove the internal restrictor found in the stock BCS itself.
  
-The one advantage here is that you can plug the solenoid directly into the factory harness without need for cutting and soldering wires into place. ​  ​You'​ll just spend some time locating an appropriate restrictor "​pill"​ from somewhere. ​ These are probably readily available, though. ​ Just search for [[http://​www.google.com/​search?​hl=en&​as_q=evo+boost+pill|"​EVO"​ boost pills]] or something similar.+The one advantage here is that you can plug the solenoid directly into the factory harness without need for cutting and soldering wires into place. ​  ​You'​ll just spend some time locating an appropriate restrictor "​pill"​ from somewhere. ​ These are probably readily available, though. ​ Just search for [[http://​www.google.com/​search?​hl=en&​as_q=evo+boost+pill|"​EVO"​ boost pills]] or something similar.  It has also been suggested that you can just use some 0.025" welding tips instead.
  
 ===== GM BCS ===== ===== GM BCS =====
bcschoice.txt · Last modified: 2024/03/15 11:16 (external edit)