bcssetup
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
bcssetup [2010/08/02 09:20] twdorris |
bcssetup [2010/08/02 09:21] twdorris |
||
|---|---|---|---|
| Line 36: | Line 36: | ||
| Start by following the procedure in Approach 1 to get your base duty cycle around where you want it. | Start by following the procedure in Approach 1 to get your base duty cycle around where you want it. | ||
| + | |||
| Line 52: | Line 53: | ||
| === Collecting some data === | === Collecting some data === | ||
| - | You do that by making a good, long 1st, 2nd and 3rd gear pull with error correction disabled and starting at an RPM below where the turbo can build boost. So start at, say, 2500 RPM on a flat road in each gear and wind it out to, say, 7000 RPM at full throttle. Repeat for each gear and maybe do a couple pulls like that. You want as much data as you can. | + | You can get a good Boost Target starting point by making a long 1st, 2nd and 3rd gear pull with error correction disabled and starting at an RPM below where the turbo can build boost. So start at, say, 2000-2500 RPM on a flat road in each gear and take it out to, say, 7000-7500 RPM at full throttle. Repeat for each gear and maybe do a couple pulls like that. You want as much data as you can get. |
| === Use the Set Boost (WGS) tables helper function === | === Use the Set Boost (WGS) tables helper function === | ||
| - | With that datalog displaced, right click on the graph and select the "Set Boost (WGS) tables" helper function. This function averages the boost pressure and duty cycle at each RPM point and in each gear found in the current datalog and copies that data into the Boost (WGS) tab. | + | With that datalog displayed, right click on the graph and select the "Set Boost (WGS) tables" helper function. This function averages the boost pressure and duty cycle at each RPM point and in each gear found in the current datalog and copies that data into the Boost (WGS) tab. |
| When you do this with "good" data, you'll find a table similar to the following: | When you do this with "good" data, you'll find a table similar to the following: | ||
bcssetup.txt ยท Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
