This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
bcssetup [2010/08/02 09:26] twdorris |
bcssetup [2014/01/14 05:43] twdorris [ECU-based Boost Control Setup] |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== ECU-based Boost Control Setup ====== | ====== ECU-based Boost Control Setup ====== | ||
+ | |||
The high-level summary of what we're going to do here is provided below. | The high-level summary of what we're going to do here is provided below. | ||
+ | |||
- Set base duty cycle to 0% and then increase from there to prove that you have proper control over your boost pressure. | - Set base duty cycle to 0% and then increase from there to prove that you have proper control over your boost pressure. | ||
Line 7: | Line 9: | ||
- If you don't want to do error correction, you can stop here and just fine tune. | - If you don't want to do error correction, you can stop here and just fine tune. | ||
- If you want to enable error correction, then you can enable that now and start making some pulls to collect data. | - If you want to enable error correction, then you can enable that now and start making some pulls to collect data. | ||
- | - Use the learned error correction datalogs and the Set boost tables helper function to copy over data from you logs into the base tables. | + | - Use the learned error correction datalogs and the Set boost tables helper function to copy over data from your logs into the base tables. |
- | + | ||
- | + | ||
===== Approach 1: Just disable error correction ===== | ===== Approach 1: Just disable error correction ===== |