bcssetup
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
bcssetup [2010/08/02 09:26] twdorris |
bcssetup [2014/01/14 05:44] twdorris [Approach 1: Just disable error correction] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== ECU-based Boost Control Setup ====== | ====== ECU-based Boost Control Setup ====== | ||
| + | |||
| The high-level summary of what we're going to do here is provided below. | The high-level summary of what we're going to do here is provided below. | ||
| + | |||
| - Set base duty cycle to 0% and then increase from there to prove that you have proper control over your boost pressure. | - Set base duty cycle to 0% and then increase from there to prove that you have proper control over your boost pressure. | ||
| Line 7: | Line 9: | ||
| - If you don't want to do error correction, you can stop here and just fine tune. | - If you don't want to do error correction, you can stop here and just fine tune. | ||
| - If you want to enable error correction, then you can enable that now and start making some pulls to collect data. | - If you want to enable error correction, then you can enable that now and start making some pulls to collect data. | ||
| - | - Use the learned error correction datalogs and the Set boost tables helper function to copy over data from you logs into the base tables. | + | - Use the learned error correction datalogs and the Set boost tables helper function to copy over data from your logs into the base tables. |
| + | ===== Approach 1: Just disable error correction ===== | ||
| + | By far, the easiest approach to dialing in the boost tables is to simply disable error correction. When you do that, you can ignore the Boost Target table entirely and just tweak the Base Duty Cycle to get about what you want. In fact, doing this is the starting point for setting up the boost target table for use with error correction. | ||
| - | ===== Approach 1: Just disable error correction ===== | ||
| - | By far, the easiest approach to dialing in the boost tables is to simply disable error correction. When you do that, you can ignore the Boost Target table entirely and just tweak the Base Duty Cycle to get about what you want. In fact, doing this is the starting point for setting up the boost target table for use with error correction. | ||
| - | |||
| - | Start by checking the **Disable error correction** checkbox on the Boost (WGS) tab. | ||
| + | Start by checking the **Disable error correction** checkbox on the Boost (WGS) tab (after you have already checked the **Enable boost control** checkbox, of course). | ||
| ==== Confirm that you have control ==== | ==== Confirm that you have control ==== | ||
bcssetup.txt ยท Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
