bcssetup
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
bcssetup [2014/01/14 05:44] twdorris [Approach 1: Just disable error correction] |
bcssetup [2014/01/14 05:45] twdorris [Confirm that you have control] |
||
|---|---|---|---|
| Line 20: | Line 20: | ||
| ==== Confirm that you have control ==== | ==== Confirm that you have control ==== | ||
| + | |||
| + | |||
| The first step is to confirm that you actually have some control over your boost. | The first step is to confirm that you actually have some control over your boost. | ||
| - | Set the base duty cycle table to 0% across the board. You can do this by selecting all the cells in the table at once and then using the Ctrl+down arrow key combination to run all the cells down to 0%. | ||
| - | Go make a pull and confirm that you're getting wastegate pressure (probably around 10-15psi depending on the wastegate). You may find that you get some boost creep towards the end of the pull. That's usually fine too. You're just looking to see the minimum amount of boost you can achieve with your current setup. | + | Set the base duty cycle table to 0% across the board. You can do this by selecting all the cells in the table at once, right clicking on those cells and the selecting the **Zero values ** menu item.. |
| + | |||
| + | |||
| + | Go make a pull and confirm that you're getting wastegate pressure (probably around 10-15psi depending on the wastegate). You may find that you get some boost creep towards the end of the pull. That's usually fine too. You're just looking to see the minimum amount of boost you can achieve with your current setup. | ||
| - | Now, try increasing the base duty cycle table a bit and see that you can build more boost as the duty cycle values go up. Try setting all the cells to 50%, then 65%, then 80%, etc. You *should* see boost increase as the duty cycle increases. If it does, great...you have everything installed correctly and your system is working in a predictable manner. If not, review the [[bcsinstall|install page]] to see if you can find what's wrong. | ||
| + | Now, try increasing the base duty cycle table a bit and see that you can build more boost as the duty cycle values go up. Try setting all the cells to 50%, then 65%, then 80%, etc. You *should* see boost increase as the duty cycle increases. If it does, great…you have everything installed correctly and your system is working in a predictable manner. If not, review the [[:bcsinstall|install page]] to see if you can find what's wrong. | ||
| ==== Pick a point ==== | ==== Pick a point ==== | ||
bcssetup.txt · Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
