ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>Creating an ECMLink application debug file</h1> <div class="level1"> <p> In some debugging situations, it's necessary to collect more information from a customer's runtime environment. You do that by increasing the debug level in our logging system. Doing so dramatically increases log volume, though. So you do not want to leave the configuration in this state permanently. </p> </div> <h2>Usage</h2> <div class="level2"> <p> To create a fresh applog.txt file: </p> <ol> <li class="level1"> Exit the ECMLink application</li> <li class="level1"> Edit the logging.properties file (more details below)</li> <li class="level1"> Start the ECMLink application</li> <li class="level1"> Recreate the problem you were having</li> <li class="level1"> Exit the ECMLink application</li> <li class="level1"> Grab the applog.txt file and edit/post it up on our forums</li> <li class="level1"> Edit the logging.properties file and undo the changes you made above</li> </ol> </div> <h2>logging.properties file</h2> <div class="level2"> <p> Locate the logging.properties file in the installation root directory. Under Windows, this will typically be: </p> <pre class="code">C:\Program Files\ECMLink </pre><p> </p> <p> You should find a file there that has a section that looks something like this. </p> <pre class="code">############################################################ # Facility specific properties. ############################################################ .level = WARNING com.ecmtuning.ecmlink.level = FINE </pre><p> </p> <p> Change that FINE to FINEST and you'll get a LOT more debug data. </p> </div> <h2>applog.txt file</h2> <div class="level2"> <p> The debug file can be located in the following directory: </p> <pre class="code">C:\Documents and Settings\&lt;username>\ecmlink </pre><p> </p> <p> The filename will be applog.txt. </p> </div>