ecuinputdata
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
ecuinputdata [2009/02/22 09:49] twdorris |
ecuinputdata [2014/09/10 12:18] twdorris [ECU Input Impedance Mismatch] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== ECU Input Impedance Mismatch ====== | ====== ECU Input Impedance Mismatch ====== | ||
| - | There are a number of analog inputs available on the 1G and 2G ECU. Many are used for critical engine operation, but some are available for datalogging [[ExternalSensorList|aftermarket sensors]]. The problem is that some of these inputs are incompatible with some aftermarket sensors. In particular, the 1G EGR temperature input and the 2G baro input have pull up/pull down resistor configurations that some sensors are not capable of driving properly. The solution to this is to "buffer" the input so that the sensor is not directly driving the ECU's input. The circuit and buffer board described below can be used for this purpose. The picture below illustrates the buffer board available for purchase from ECMTuning. | ||
| - | {{http://www.ecmtuning.com/images/forums/typicalinstall.gif}} | + | There are a number of analog inputs available on the 1G and 2G ECU. Many are used for critical engine operation, but some are available for datalogging [[:externalsensorlist|aftermarket sensors]]. The problem is that some of these inputs are incompatible with some aftermarket sensors. In particular, the 1G EGR temperature input and the 2G baro input have pull up/pull down resistor configurations that some sensors are not capable of driving properly. |
| - | **12/19/2007:** We are now accepting orders for these completed units. We have several in stock, ready to ship. | ||
| - | http://www.ecmtuning.com/product_info.php?cPath=26&products_id=39 | + | The solution to this is to "buffer" the input so that the sensor is not directly driving the ECU's input. The circuit and buffer board described below can be used for this purpose. The picture below illustrates the buffer board available for purchase from ECMTuning. |
| + | {{http://www.ecmtuning.com/images/forums/typicalinstall.gif?direct&}} | ||
| + | **01/01/2013:**Due to low demand, we've decided to discontinue this product. Many common sensors now include this type of functionality internally, negating the need for this board. The Omni 4-bar sensor that we sell on our website, for example, has this functionality built in. Most, if not all, wideband kits these days do too. | ||
| ====== Connections ====== | ====== Connections ====== | ||
ecuinputdata.txt ยท Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
