User Tools

Site Tools


engineandecu101

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
engineandecu101 [2009/02/26 12:30]
twdorris
engineandecu101 [2010/02/26 13:12]
twdorris
Line 17: Line 17:
  
 The bottom line is that you need accurate airflow readings to the ECU if you want the ECU to inject accurate fuel. The bottom line is that you need accurate airflow readings to the ECU if you want the ECU to inject accurate fuel.
 +
  
  
  
 ===== Fuel flow ===== ===== Fuel flow =====
-From the amount of air the ECU is told is going into the engine, the ECU calculates an amount of fuel required to maintain a 14.7:1 A/F ratio using stock injectors at stock fuel pressure. ​ This is where things can get a little tricky to keep straight in your head.  The ECU is coded from the factory to account for the configuration the engine came with from the factory. ​ That is, stock injectors and stock fuel pressure. ​ On a stock 2G DSM, that's 450 cc/min injectors at 43.5psi base fuel pressure. ​ On a stock 1G manual DSM, that's 450 cc/min injectors at 37psi. ​ Stock 1G automatics came with 390s at 43.5psi.  This determines the flow rate of fuel into the engine. ​ From that flow rate assumption, the ECU can calculate how long to hold the injectors open to get a specific flow rate required for the air it believes is coming into the engine.+From the amount of air the ECU is told is going into the engine, the ECU calculates an amount of fuel required to maintain a 14.7:1 A/F ratio using stock injectors at stock fuel pressure. ​ This is where things can get a little tricky to keep straight in your head.  The ECU is coded from the factory to account for the configuration the engine came with from the factory. ​ That is, stock injectors and stock fuel pressure. ​ On a stock 2G DSM, that's 450 cc/min injectors at 42.6psi base fuel pressure. ​ On a stock 1G manual DSM, that's 450 cc/min injectors at 37psi. ​ Stock 1G automatics came with 390s at 42.6psi.  This determines the flow rate of fuel into the engine. ​ From that flow rate assumption, the ECU can calculate how long to hold the injectors open to get a specific flow rate required for the air it believes is coming into the engine.
  
 So, you have two things now that the ECU needs to have accurate information on.  First, it needs accurate airflow to calculate fuel flow requirements and second, it needs to know if you've changed anything that affects fuel flow into the engine. ​ If you change base fuel pressure or you swap in different injectors, you have to adjust the ECU's fuel flow calculations to take this into account. So, you have two things now that the ECU needs to have accurate information on.  First, it needs accurate airflow to calculate fuel flow requirements and second, it needs to know if you've changed anything that affects fuel flow into the engine. ​ If you change base fuel pressure or you swap in different injectors, you have to adjust the ECU's fuel flow calculations to take this into account.
engineandecu101.txt ยท Last modified: 2024/03/15 11:16 (external edit)