User Tools

Site Tools


externalsensorlist

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

externalsensorlist [2008/01/23 07:36]
76.100.119.159
externalsensorlist [2024/03/15 11:16]
Line 1: Line 1:
-====== Supported aftermarket sensors ====== 
-The lists below detail which sensors the DSMLink application supports for datalogging. ​ Others can be added fairly easily, but this does require a new application build and so this doesn'​t happen very often. 
- 
-===== Wideband O2 kits ===== 
- 
-  * AEM with and without gauge 
-  * Dyno Jet 
-  * FJO 
-  * [[InnovateLC1orLM1Install|Innovate LM-1 & LC-1]] (see note below) 
-  * PLX M-series 
-  * Techedge v1 and v2 
-  * Zeitronix ZT-2 
-  * NGK AFX 
- 
-===== Boost pressure sensors ===== 
- 
-  * AVCR 3 and 4-bar 
-  * GM 3 and 3.3-bar 
-  * AEM 3.5 and 5-bar 
-  * Apex'I EL series 
-  * Greddy 52mm and 60mm 
-  * Turbo XS sensors 
- 
-===== Miscellaneous ===== 
- 
-  * Autometer fuel and oil pressure (sensor #2246) 
-    * Note: this is apparently [[http://​www.kavlico.com/​pages/​products_sensors/​pressure_sensors/​standard_designs1.htm#​p265|Kavlico'​s P265 sensor]]. ​ Further discussion can be found on the Innovate Motorsports threads [[http://​www.innovatemotorsports.com/​forums/​showthread.php?​t=1108|here]] and [[http://​www.innovatemotorsports.com/​forums/​showthread.php?​t=662|here]]. 
-  * GM intake air temperaure 
-  * Apex'I EL EGT 
- 
-**LM1/LC1 note** - These have programmable outputs. ​ Which means there is no "​standard"​ display conversion format. ​ So what we suggest you do is to program the output to mimic another device that we do support. ​ Typically this would be the linear TechEdge output that has 9:1 mapped to 0v and 19:1 mapped to 5v.  Then you would datalog this as the linear TechEdge (TEWBLin). 
  
externalsensorlist.txt ยท Last modified: 2024/03/15 11:16 (external edit)