User Tools

Site Tools


gmmafcablemod

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
gmmafcablemod [2009/06/08 10:16]
twdorris
gmmafcablemod [2009/06/08 15:14]
dmertz
Line 17: Line 17:
 {{http://​www.ecmtuning.com/​images/​forums/​mafgndexposed.jpg}} {{http://​www.ecmtuning.com/​images/​forums/​mafgndexposed.jpg}}
 {{http://​www.ecmtuning.com/​images/​forums/​mafgndcut.jpg}} {{http://​www.ecmtuning.com/​images/​forums/​mafgndcut.jpg}}
 +
  
  
 ===== Extend the Wire to the Firewall ===== ===== Extend the Wire to the Firewall =====
-The next step should be obvious. ​ Just solder an extension wire onto the exposed end of the GM MAF ground wire and run it over to a chassis ground point. ​ We do this with a standard ring terminal as illustrated below. ​ Of course, as always, be sure to heatshrink the solder joint...+The next step should be obvious. ​ Just solder an extension wire onto the exposed end of the GM MAF ground wire and run it over to a chassis ground point. ​ We do this with a standard ring terminal as illustrated below. ​ Of course, as always, be sure to heatshrink the solder joint.  It would also be a good idea to put a zip-tie around the three wires to the GM MAF connector to provide strain relief for the new wire...
  
 {{  http://​www.ecmtuning.com/​images/​forums/​ringterminal.jpg ​ }} {{  http://​www.ecmtuning.com/​images/​forums/​ringterminal.jpg ​ }}
  
  
gmmafcablemod.txt ยท Last modified: 2024/03/15 11:16 (external edit)