gmmafcablemod
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
gmmafcablemod [2009/06/08 15:14] dmertz |
gmmafcablemod [2024/03/15 11:16] (current) |
||
|---|---|---|---|
| Line 14: | Line 14: | ||
| The images below illustrate this process. | The images below illustrate this process. | ||
| - | {{http://www.ecmtuning.com/images/forums/mafgndorig.jpg}} | + | {{https://www.ecmtuning.com/images/forums/mafgndorig.jpg}} |
| - | {{http://www.ecmtuning.com/images/forums/mafgndexposed.jpg}} | + | {{https://www.ecmtuning.com/images/forums/mafgndexposed.jpg}} |
| - | {{http://www.ecmtuning.com/images/forums/mafgndcut.jpg}} | + | {{https://www.ecmtuning.com/images/forums/mafgndcut.jpg}} |
| Line 23: | Line 23: | ||
| The next step should be obvious. Just solder an extension wire onto the exposed end of the GM MAF ground wire and run it over to a chassis ground point. We do this with a standard ring terminal as illustrated below. Of course, as always, be sure to heatshrink the solder joint. It would also be a good idea to put a zip-tie around the three wires to the GM MAF connector to provide strain relief for the new wire... | The next step should be obvious. Just solder an extension wire onto the exposed end of the GM MAF ground wire and run it over to a chassis ground point. We do this with a standard ring terminal as illustrated below. Of course, as always, be sure to heatshrink the solder joint. It would also be a good idea to put a zip-tie around the three wires to the GM MAF connector to provide strain relief for the new wire... | ||
| - | {{ http://www.ecmtuning.com/images/forums/ringterminal.jpg }} | + | {{ https://www.ecmtuning.com/images/forums/ringterminal.jpg }} |
| + | ===== Final Results ===== | ||
| + | The following illustrates the final resulting cable. | ||
| + | |||
| + | {{ https://www.ecmtuning.com/images/forums/gmmafcableoverviewsml.png }} | ||
gmmafcablemod.1244488449.txt.gz · Last modified: 2009/06/08 15:14 by dmertz
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
