User Tools

Site Tools


injdata-fueltype

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
injdata-fueltype [2012/03/15 10:38]
twdorris
injdata-fueltype [2012/03/15 10:39]
twdorris
Line 10: Line 10:
  
 That's an extreme example, of course, but the same principles apply to fuel (with the injector being your funnel). ​ Ethanol can be very different from gasoline and even gasoline from one station can be different from another station. That's an extreme example, of course, but the same principles apply to fuel (with the injector being your funnel). ​ Ethanol can be very different from gasoline and even gasoline from one station can be different from another station.
 +
  
  
Line 28: Line 29:
   * Then we ran a set of FIC BlueMax 2150s. ​ We noted a drop of 6% in flow rate.   * Then we ran a set of FIC BlueMax 2150s. ​ We noted a drop of 6% in flow rate.
  
-The results are summarized below. ​ Keep in mind that this is a change in **volumetric** flowrate. ​ On top of this, you still have to adjust for the difference in fuel type.  So not only are injectors "​smaller"​ when running on E85 due to E85's lower stoichiometric ratio, but injectors are even smaller than that due to the difference in volumetric flowrate!+The results are summarized below. ​ Keep in mind that this is a change in **volumetric** flowrate. ​ On top of this, you still have to adjust for the difference in fuel type. 
 + 
 +So not only are injectors "​smaller"​ when running on E85 due to E85's lower stoichiometric ratio, but injectors are even smaller than that due to the difference in volumetric flowrate!
  
 ^ STOCK 450s // (click to enlarge) //  ^ FIC BM1450s // (click to enlarge) //  ^ FIC BM2150s // (click to enlarge) //  ^ ^ STOCK 450s // (click to enlarge) //  ^ FIC BM1450s // (click to enlarge) //  ^ FIC BM2150s // (click to enlarge) //  ^
 |{{fueltype-450-effects.png?​300|Stock 450}}|{{fueltype-1450-effects.png?​300|FIC BM1450}}|{{fueltype-2150-effects.png?​300|FIC BM2150}}| |{{fueltype-450-effects.png?​300|Stock 450}}|{{fueltype-1450-effects.png?​300|FIC BM1450}}|{{fueltype-2150-effects.png?​300|FIC BM2150}}|
  
-So clearly fluid properties need to be taken into account when calculating volumetric flow figures. ​ This effect also appears to depend on the injector type/size too!  Like everything else injector related, this just isn't as easy as it seems like it should be at first.+So clearly fluid properties need to be taken into account when calculating volumetric flow figures. ​ This effect also appears to depend on the injector type/size too! 
 + 
 +Like everything else injector related, this just isn't as easy as it seems like it should be at first.
  
  
injdata-fueltype.txt · Last modified: 2024/03/15 11:16 (external edit)