lc2install
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
lc2install [2014/10/05 17:16] twdorris [****NOTE:** Do **NOT** connect the BLACK wire from the LC-2 to the ECU's sensor ground. You will damage the ECU's sensor ground track if you do this.**] |
lc2install [2015/11/20 13:51] twdorris [Basic LC-2 wire assignments] |
||
|---|---|---|---|
| Line 20: | Line 20: | ||
| - | ^LC-1 wire ^Description ^Typical install point ^1G DSM ^2G DSM ^EVO1-3 | | + | ^LC-2 wire ^Description ^Typical install point ^1G DSM ^2G DSM ^EVO1-3 | |
| |Red |12V supply |Switched +12V source, fused (5A) |102 or 107 |12 or 25 |12 or 25 | | |Red |12V supply |Switched +12V source, fused (5A) |102 or 107 |12 or 25 |12 or 25 | | ||
| |Black |Ground |Battery ground (-) post |101 or 106 |13 or 26 | 13 or 26 | | |Black |Ground |Battery ground (-) post |101 or 106 |13 or 26 | 13 or 26 | | ||
| Line 26: | Line 26: | ||
| |Yellow |Analog out 2 |Selected ECU input |4 (or 15, 16) |76 (or 73, 75, 85) |56 | | |Yellow |Analog out 2 |Selected ECU input |4 (or 15, 16) |76 (or 73, 75, 85) |56 | | ||
| + | |||
| + | \\ | ||
| ==== RED wire - notes ==== | ==== RED wire - notes ==== | ||
| Line 51: | Line 53: | ||
| - | The YELLOW wire is defined by default to have a mapping of 0V = 7.35 AFR (0.5 lambda) and 5V = 22.39 AFR (1.52 lambda). This will work nicely using ECMLink's LC-1 datalogging item. So run the BROWN wire into your selected ECU input for logging and then configure ECMLink to use this input for the LC-1 log item (ECU Inputs tab) and, optionally, for the narrowband simulation function as well. | + | The YELLOW wire is defined by default to have a mapping of 0V = 7.35 AFR (0.5 lambda) and 5V = 22.39 AFR (1.52 lambda). This will work nicely using ECMLink's LC-1 datalogging item. So run the YELLOW wire into your selected ECU input for logging and then configure ECMLink to use this input for the LC-1 log item (ECU Inputs tab) and, optionally, for the narrowband simulation function as well. |
| ===== Sensor location ===== | ===== Sensor location ===== | ||
lc2install.txt · Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
