prodcompare
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
prodcompare [2010/01/13 16:01] twdorris created |
prodcompare [2024/03/15 11:16] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | | ^ V3Lite ^ Full V3 ^ | + | ====== Product comparison ====== |
| - | | **Greatly enhanced logging**| ✔ | ✔ | | + | |
| - | | **Global injector compensation**| | | | + | |
| - | | //Via DirectAccess//| ✔ | | | + | Although we no longer offer V3Lite for the DSM platform, this page is still useful for those that already have V3Lite and may be considering an upgrade to full V3 or for those that are considering the EVO1-3/GSR/RVR package (which is effectively V3Lite). This page summarizes the differences between these two versions. |
| - | | //Via ECU Config//| | ✔ | | + | |
| - | | **Injector deadtime control**| | | | + | |
| - | | //Via DirectAccess//| ✔ | ✔ | | + | **UPGRADE NOTE:** Keep in mind that the V3Lite package is upgradeable to a regular V3 package at any time. You simply purchase a [[https://www.ecmtuning.com/product_info.php?cPath=25&products_id=55|V3Lite conversion off our website]] and download a new firmware file for your ECU. |
| - | | //Offset via ECU Config//| | ✔ | | + | |
| - | | **Extended fuel and timing tables**| | | | + | |
| - | | //23psi & 8000 RPM//| ✔ | | | + | **EVO1-3 NOTE:** On the early EVO platforms, we currently only offer V3Lite. There is no "full V3" package for this platform yet. |
| - | | //35psi & 10000 RPM//| | ✔ | | + | |
| - | | **Speed Density**| | | | + | |
| - | | //26psi & 8000 RPM adjustments//| ✔ | | | + | | ^V3Lite ^V3 ^Description | |
| - | | //40psi & 10000 RPM adjustments//| | ✔ | | + | | **Greatly enhanced logging** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Logging speeds in excess of 1000 samples per second, MUCH faster than the factory interface and with far more data options. | |
| - | | **Airflow compensation**| | | | + | | **Native USB logging cable** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |A fully [[https://www.ecmtuning.com/images/1gcable.gif|opto-isolated, custom-molded solution]] that plugs neatly into the car's diagnostic port. | |
| - | | //Via DirectAccess//| ✔ | | | + | | **Live cell tracking** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Shows exactly which cells are being used for core functions as the engine is running or while viewing a datalog. | |
| - | | //Via ECU Config//| | ✔ | | + | | **Global injector compensation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run just about any injector you want. We've seen applications running everything from stock injectors on gasoline to Bosch 2100s on E85 to dual-rail 10-injector setups on who knows what. A basic starting point can be found on our [[:baseinjectordata|Injector Data page]] with more complete details on our [[:fuelsettingshelp|Fuel Settings page]]. | |
| - | | **Selectable Mitsubishi MAS**| | | | + | | **Injector deadtime control** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Aftermarket injectors require custom deadtime adjustments to idle and cruise properly. | |
| - | | //Via DirectAccess remap//| ✔ | | | + | | **Extended fuel and timing tables** | | |You can run outside these ranges. You just won't have individual adjustment points. | |
| - | | //Via ECU Config drop down//| | ✔ | | + | | //8000 RPM & 23psi// | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | |Extended fuel and timing tables - V3Lite | |
| - | | **MAP sampling relative to crank position**| ✔ | ✔ | | + | | //10000 RPM & 35psi// | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Extended fuel and timing tables - full V3 | |
| - | | **Engine speed limits (rev, launch, NLTS, etc.)**| ✔ | ✔ | | + | | **Speed Density** | | |You can run outside these ranges. You just won't have individual adjustment points. A good starting point for setting up SD can be found on our [[:sdsetup|SD Setup page]]. | |
| - | | **Torque calculation inside the ECU**| ✔ | ✔ | | + | | //8000 RPM & 26psi// | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | |Speed Density support - V3Lite | |
| - | | **Dash gauge display**| ✔ | ✔ | | + | | //10000 RPM & 40psi// | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Speed Density support - full V3 | |
| - | | **TPS adjustments/dial-in**| ✔ | ✔ | | + | | **Airflow compensation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |To help fine tune your fuel trims under varying driving conditions. | |
| - | | **Idle switch simulation**| ✔ | ✔ | | + | | **Selectable Mitsubishi MAS** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run a 1G DSM, Galant VR4, 2G DSM, or EVO8/3G MAS. | |
| - | | **Narrowband O2 simulation**| ✔ | ✔ | | + | | **Engine speed limits** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |The "standard" RPM limits (rev limiter, launch stutterbox, no lift to shift). | |
| - | | **Anti-lag**| ✔ | ✔ | | + | | **Torque calculation inside the ECU** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Best possible torque calculation using all the data immediately available inside the ECU. This effectively utilizes information from every single firing event. | |
| - | | **Knock sensor control**| ✔ | ✔ | | + | | **Dash gauge display** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Change the factory boost gauge display to show whatever you want. | |
| - | | **Solenoid tests**| ✔ | ✔ | | + | | **TPS adjustments/dial-in** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Automatic TPS calibration. For more details, see the [[:v3tpsadj|TPS Adjust page]]. | |
| - | | **Fan control, fuel pump control, etc.**| ✔ | ✔ | | + | | **Idle switch simulation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Simulates the idle switch for less hassle. Just use the [[:v3tpsadj|Auto TPS Adjust]] function and then check the simulate idle switch checkbox. That's all there is to it. | |
| - | | **DTCs (check engine codes)**| ✔ | ✔ | | + | | **Narrowband O2 simulation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run normal closed loop operation using your wideband. This frees up inputs to the ECU for logging other things, like manifold pressure. Complete details can be found on the [[:v3narrowbandsim|Narrowband simulation page]]. | |
| - | | **Log aftermarket sensors**| ✔ | ✔ | | + | | **Anti-lag** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Quick spool the turbo off the line by retarding ignition when launching or shifting gears. | |
| - | | **O2 feedback control**| ✔ | ✔ | | + | | **Knock sensor control** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Work around phantom knock by defining the operating conditions under which the knock sensor can be ignored. | |
| - | | **Throttle tip-in adjustments**| ✔ | ✔ | | + | | **Solenoid tests** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |One-click tests of each solenoid output. | |
| - | | **Airflow smoothing**| ✔ | ✔ | | + | | **Fan control, fuel pump control, etc.** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Enable fans full time (not available on the 1G) or fuel pump. | |
| - | | **Long-term fuel trim control points**| ✔ | ✔ | | + | | **DTCs (check engine codes)** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Check engine diagnostic codes. | |
| - | | **Open loop thresholds**| ✔ | ✔ | | + | | **Log aftermarket sensors** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Log any number of aftermarket sensors, including boost sensors, air temp sensors, fuel pressure sensors and wideband kits. [[:installnewsensor|This page]] is a good starting point for more information. | |
| - | | **Native GM MAF support**| | ✔ | | + | | **Throttle tip-in adjustments** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Tweak the "snap throttle" response. | |
| - | | **Switchable secondary maps**| | ✔ | | + | | **Open loop thresholds** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run closed loop with more or less throttle and under more or less load. Useful when you want to maintain closed loop operation above 80mph on a 1G, for example, or idle in open loop but cruise in closed loop or just to extend the areas where you collect closed loop data for dialin. | |
| - | | **Secondary fuel (more than 4 injectors)**| | ✔ | | + | | **Auto MAF compensation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |An [[:v3mafadjcombft|extremely useful tool]] for getting those fuel trims inline quick and easy. Automatically dials in MAF compensation for you. | |
| - | | **Output controls (nitrous, water injection, etc.)**| | ✔ | | + | | **Auto-scaled, RPM-based fuel adjustments** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Make quick and easy "3D" adjustments by letting the ECU do the work for you. | |
| - | | **Auto-scaled, RPM-based fuel adjustments**| | ✔ | | + | | **Simplified RPM-based timing controls** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Make a few quick tweaks to timing before you go into the full 3D table and adjust the cells individually. | |
| - | | **Simplified RPM-based timing controls**| | ✔ | | + | | **Native GM MAF support** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run a GM MAF sensor directly into the ECU using our cable! No GM MAF translator device required. Our cable with the [[:v3mafadjcombft|auto MAF adjustment tool]] makes dialing in a GM MAF sensor cake work. | |
| - | | **Idle air simulation**| | ✔ | | + | | **Hot start enrichment** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |ECMLink provides an enrichment function when the engine is started while hot. If you find that you need this function because your engine seems to run lean when started hot, then check this box. | |
| + | | **MAF sensor simulation** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Allows you to run a nice, smooth factory MAF for all your idle and cruise functions and then switch to pseudo SD when the MAF sensor is about to over run. This function basically disables the MAF under high boost and simulates and extrapolates airflow automatically. | | ||
| + | | **Switchable secondary maps** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Switch in a second set of base timing and fuel maps. Can be activated manually with a switch on the dash or automatically based on criteria you define. | | ||
| + | | **Secondary fuel compensation** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run more than 4 injectors or switch between different fuels (e85 and gasoline, for example). Can be activated manually with a switch on the dash or automatically based on criteria you define. | | ||
| + | | **Programmable output controls** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Control your nitrous kit or water injection or any number of other things using a set of parameters you define. | | ||
| + | | **Idle air simulation** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Works around that annoying stall when coming to a stop or pressing the clutch pedal in. Can also be used to run a vented blow off valve with a factory mass air sensor. | | ||
| + | | **Individual deadtime control** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Adjust the deadtime of each injector individually. Makes for smoother idle and better fuel control at cruise with large injectors. | | ||
| + | | **High resolution deadtime** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Nearly four times the resolution in deadtime control compared to factory. Further improves idle quality and possibly mileage too! | | ||
| + | | **Gear-based boost control** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Full [[:boostcontrol|boost control]] functionality with gear-based operation. | | ||
| + | | **Flex-fuel sensor operation** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Supports running a GM-style flex fuel sensor to automatically adjust for ethanol content of your fuel. Fill up with E85 or top-off with gasoline...it won't matter. And you can define two separate tunes for two different points on the ethanol curve and let the ECU interpolate between them. | | ||
| + | |||
| + | |||
| + | \\ | ||
prodcompare.1263416468.txt.gz · Last modified: 2010/01/13 16:01 by twdorris
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
