Differences

This shows you the differences between two versions of the page.

--- sdhose [2010/05/21 13:37]
twdorris
+++ sdhose [2010/05/21 13:37]
twdorris
@@ Line 10: / Line 10: @@
 ====== Best Case ======
-The "best case" scenario is to locate the pressure sensor directly on the manifold.  An example is shown below on a 2G using an MDP adapter from Road Race Engineering and an AEM 5-bar sensor (click image to enlarge).
+The "best case" scenario is to locate the pressure sensor directly on the manifold.
 ===== 2G DSM Example =====
+An example is shown below on a 2G using an MDP adapter from Road Race Engineering and an AEM 5-bar sensor (click image to enlarge).
 {{  http://www.ecmtuning.com/images/forums/sddata/aemmdp.jpg?256x192  }}

ECMTuning - wiki