This is an old revision of the document!
We get asked fairly often about the actual socket we use when doing a socket job on an ECU. This page is just a collection of that information.
We use a low-profile, machined-pin socket made by Mill-Max. It's a 28-pin socket, of course, to match the 28-pin EPROM used in the DSM ““ECUs””.
Vendor | Mill-Max Manufacturing Corp. |
---|---|
Manufacturer P/N | 110-99-628-41-001000 |
Description | IC SOCKET 28PIN MS TIN/TIN .600 |
Contact Finish | Tin-Lead, 200 µin (5.08 µm) |
Digikey P/N | ED3728-ND |
RoHS Replacement | 110-44-628-41-001000 |
To order one of these, you can just contact Digi-Key using the part number information above. A picture of this socket is provided below.