User Tools

Site Tools


use_ecmlink_in_98_99_dsm

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
use_ecmlink_in_98_99_dsm [2011/05/19 09:29]
twdorris
use_ecmlink_in_98_99_dsm [2024/03/15 11:16] (current)
Line 4: Line 4:
  
 ===== ECU Details ===== ===== ECU Details =====
 +
 +
 For the 2G DSMs, there are a few different types of ECUs that are compatible with ECMLink. For the 2G DSMs, there are a few different types of ECUs that are compatible with ECMLink.
  
-  ​* 95 EPROM ECU (MD312464 or MD309947 with "​E"​ on [[http://www.dsmlink.com/​images/​photos/​eculabel-mid.gif|the case label]]) + 
-  * 95 non-EPROM ECU (MD312464 or MD309947 without "​E"​ on [[http://www.dsmlink.com/​images/​photos/​eculabel-mid.gif|the case label]])+  ​* 95 EPROM ECU (MD312464 or MD309947 with "​E"​ on [[https://www.ecmtuning.com/​images/​photos/​eculabel-mid.gif|the case label]]) 
 +  * 95 non-EPROM ECU (MD312464 or MD309947 without "​E"​ on [[https://www.ecmtuning.com/​images/​photos/​eculabel-mid.gif|the case label]])
   * 96 non-EPROM ECU (MD321911 or MD321912)   * 96 non-EPROM ECU (MD321911 or MD321912)
   * 97 non-EPROM ECU (MD326328 or MD335287)   * 97 non-EPROM ECU (MD326328 or MD335287)
  
-The following sections break each of these down for you.  We do usually have ECUs in stock too, if you can't find one yourself. ​ We sell them directly off [[http://​www.ecmtuning.com/​product_info.php?​cPath=24&​products_id=41|our website]] with new ECMLink package purchases.+ 
 +The following sections break down each of these for you. We do usually have ECUs in stock too, if you can't find one yourself. We sell them directly off [[https://​www.ecmtuning.com/​product_info.php?​cPath=24&​products_id=41|our website]] with new ECMLink package purchases ​made directly through us.  If you plan to order your ECMLink package from a reseller, we ask that the reseller work with you to locate an appropriate ECU.  They are simply too hard to keep in stock for all the resellers out there.
  
 ==== Using a 95 EPROM ECU ==== ==== Using a 95 EPROM ECU ====
-You can run a 95 EPROM ECU by simply swapping the plug wires under the hood ​See ​our [[swapplugwires|plug swap page]] for details It's really very easy.+We can now convert ​a 95 EPROM ECU to be 100% compatible with a 97-99 or 1G style cam angle sensor. ​ There is no need to swap plug wires around or select ​the "use non-95/96 style cam angle sensor"​ option in ECMLink if we have done this 97+ conversion on your 95 EPROM ECU. 
 + 
 +When you place your ECMLink order off our website, you will simply select "​Socket EPROM ECU" as your socket/​conversion option at the bottom of the page. 
 + 
 +**ORDERING NOTE:** Be sure to note in the order that the ECU will be used in a 97 or later car so that we know to do the 97 conversion on it while we're socketing the ECU. 
  
-You should also go into the ECU Config->​Misc tab and check the "use non-95/96 style cam angle sensor"​ check box. 
  
-That's really all there is to running a 95 EPROM ECU in your 98/99 DSM. 
  
-When you place your ECMLink order off our website, you will simply select "​Socket EPROM ECU" as your socket/​conversion option at the bottom of the page. 
  
 ==== Using a 95 or 96 non-EPROM ECU ==== ==== Using a 95 or 96 non-EPROM ECU ====
-You can use a 95 or 96 non-EPROM ECU if you absolutely have to.  But if you're going to use a non-EPROM ECU anyway, it's better ​to try to locate ​97 non-EPROM ​ECU.+You can use a 95 or 96 non-EPROM ECU but it will need to have our non-EPROM ​to EPROM conversion installed. 
 + 
 +While installing the conversion we will move jumper J5 to J1 to convert the ECU to a 97.  You do not need to swap the plug wires or check the cam angle sensor checkbox because the 97 ECU was made to work with the same cam angle sensor as found on a 98/99 DSM.
  
 If you do decide to use a 95 or 96 non-EPROM ECU, then you will need to select "2G non-EPROM conversion"​ in the socket/​conversion option at the bottom of the ECMLink ordering page. If you do decide to use a 95 or 96 non-EPROM ECU, then you will need to select "2G non-EPROM conversion"​ in the socket/​conversion option at the bottom of the ECMLink ordering page.
  
-You will also need to swap your plug wires and check the cam angle sensor checkbox as described above for a 95 EPROM ECU.+**ORDERING NOTE:** Be sure to note in the order that the ECU will be used in a 97 or later car so that we know to move the cam-signal inversion jumper.
  
 ==== Using a 97 non-EPROM ECU ==== ==== Using a 97 non-EPROM ECU ====
Line 33: Line 41:
  
 All you need to do is select "2G non-EPROM conversion"​ in the socket/​conversion option at the bottom of the ECMLink ordering page. All you need to do is select "2G non-EPROM conversion"​ in the socket/​conversion option at the bottom of the ECMLink ordering page.
 +
use_ecmlink_in_98_99_dsm.1305811795.txt.gz · Last modified: 2011/05/19 09:29 by twdorris