usenitrouscontrolsfordejontoolbovmod
Differences
This shows you the differences between two versions of the page.
| Next revision Both sides next revision | |||
|
usenitrouscontrolsfordejontoolbovmod [2008/01/23 07:14] 76.100.119.159 created |
usenitrouscontrolsfordejontoolbovmod [2008/01/23 07:14] 76.100.119.159 |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| * [[http://www.jakelatham.com/1gDSM/projects/dejon_bov/index.shtml|"Dejon Tool mod"]] | * [[http://www.jakelatham.com/1gDSM/projects/dejon_bov/index.shtml|"Dejon Tool mod"]] | ||
| - | ====== Details ====== | + | ====== Overview ====== |
| Basically, you intercept the pressure going to the bottom of the BOV so that at high boost, the BOV only sees pressure on the top, forcing it to stay closed. But when you lift off the throttle, pressure is again applied to the bottom to help open the BOV more quickly. | Basically, you intercept the pressure going to the bottom of the BOV so that at high boost, the BOV only sees pressure on the top, forcing it to stay closed. But when you lift off the throttle, pressure is again applied to the bottom to help open the BOV more quickly. | ||
| + | |||
| + | ====== Details ====== | ||
| I used the nitrous controls in DSMLink to control the fuel pressure solenoid. Basically, you feed a pre-throttle plate pressure source ("A" port on a 2G TB or the "A1" port on a 1G) into the "input" side of the fuel pressure solenoid. Then feed the switched output to the bottom feed of the 1G BOV. Using the standard nitrous controls in DSMLink you can then have the BOV completely shut with high throttle, but completely stock at all other times. The picture below illustrates which port on the fuel pressure solenoid goes where. | I used the nitrous controls in DSMLink to control the fuel pressure solenoid. Basically, you feed a pre-throttle plate pressure source ("A" port on a 2G TB or the "A1" port on a 1G) into the "input" side of the fuel pressure solenoid. Then feed the switched output to the bottom feed of the 1G BOV. Using the standard nitrous controls in DSMLink you can then have the BOV completely shut with high throttle, but completely stock at all other times. The picture below illustrates which port on the fuel pressure solenoid goes where. | ||
usenitrouscontrolsfordejontoolbovmod.txt ยท Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
