ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>Enabling debug text in V2</h1> <div class="level1"> </div> <h2>Initial</h2> <div class="level2"> <p> Start by locating the <code>dsmlink.prefs</code> file. This file can be found in the DSMLink main program directory. Unless you specified something different at install time, this would normally be: </p> <p> <code>C:\Program Files\DSMLink</code> </p> <p> Edit the file with Notepad or some other basic text editor. Be sure that DSMLink is not running while you edit this file. Once you save the file, run DSMLink again to see the effects. </p> </div> <h2>Details</h2> <div class="level2"> <p> Add the following line to your <code>dsmlink.prefs</code> file. You can add this line anywhere in the file. </p> <p> <code>debug=0xFF</code> </p> <p> Save the file and run DSMLink again to reproduce whatever problem you were having. When you have reproduced this problem, exit the DSMLink application and go back into the DSMLink main program directory (the same directory where the <code>dsmlink.prefs</code> file was located). There should now be a debug.txt file in that directory with the new debug text in it. </p> </div>