prodcompare
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
prodcompare [2010/01/13 16:36] twdorris |
prodcompare [2024/03/15 11:16] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Product comparison ====== | ====== Product comparison ====== | ||
| - | This page outlines the differences in our V3Lite and Full V3 packages. Keep in mind that even if you go with V3Lite, you can always upgrade to the full package later with a simple download from our website! | ||
| - | | ^ V3Lite ^ V3 ^Description ^ | + | |
| - | | **Greatly enhanced logging**| ✔ | ✔ |Logging speeds in excess of 1000 samples per second, MUCH faster than the factory interface and with far more data options.| | + | Although we no longer offer V3Lite for the DSM platform, this page is still useful for those that already have V3Lite and may be considering an upgrade to full V3 or for those that are considering the EVO1-3/GSR/RVR package (which is effectively V3Lite). This page summarizes the differences between these two versions. |
| - | | **Native USB logging cable**| ✔ | ✔ |Custom molded solution that plugs neatly into the car's diagnostic port.| | + | |
| - | | **Global injector compensation**| ✔ | ✔ | | | + | |
| - | | **Injector deadtime control**| ✔ | ✔ | | | + | **UPGRADE NOTE:** Keep in mind that the V3Lite package is upgradeable to a regular V3 package at any time. You simply purchase a [[https://www.ecmtuning.com/product_info.php?cPath=25&products_id=55|V3Lite conversion off our website]] and download a new firmware file for your ECU. |
| - | | **Extended fuel and timing tables**| | |You can run outside these ranges. You just won't have individual adjustment points.| | + | |
| - | | //8000 RPM & 23psi//| ✔ | | | + | |
| - | | //10000 RPM & 35psi//| | ✔ | | + | **EVO1-3 NOTE:** On the early EVO platforms, we currently only offer V3Lite. There is no "full V3" package for this platform yet. |
| - | | **Speed Density**| | |You can run outside these ranges. You just won't have individual adjustment points.| | + | |
| - | | //8000 RPM & 26psi//| ✔ | | | + | |
| - | | //10000 RPM & 40psi//| | ✔ | | + | | ^V3Lite ^V3 ^Description | |
| - | | **Airflow compensation**| ✔ | ✔ |To help fine tune your fuel trims under varying driving conditions.| | + | | **Greatly enhanced logging** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Logging speeds in excess of 1000 samples per second, MUCH faster than the factory interface and with far more data options. | |
| - | | **Selectable Mitsubishi MAS**| ✔ | ✔ |Run a 1G DSM, Galant VR4, 2G DSM, or EVO8/3G MAS.| | + | | **Native USB logging cable** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |A fully [[https://www.ecmtuning.com/images/1gcable.gif|opto-isolated, custom-molded solution]] that plugs neatly into the car's diagnostic port. | |
| - | | **MAP sampling relative to crank position**| ✔ | ✔ |Samples manifold pressure relative to crankshaft position for best possible reading.| | + | | **Live cell tracking** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Shows exactly which cells are being used for core functions as the engine is running or while viewing a datalog. | |
| - | | **Engine speed limits**| ✔ | ✔ |The "standard" RPM limits (rev limiter, launch stutterbox, no lift to shift).| | + | | **Global injector compensation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run just about any injector you want. We've seen applications running everything from stock injectors on gasoline to Bosch 2100s on E85 to dual-rail 10-injector setups on who knows what. A basic starting point can be found on our [[:baseinjectordata|Injector Data page]] with more complete details on our [[:fuelsettingshelp|Fuel Settings page]]. | |
| - | | **Torque calculation inside the ECU**| ✔ | ✔ |Best possible torque calculation using all the data immediately inside the ECU.| | + | | **Injector deadtime control** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Aftermarket injectors require custom deadtime adjustments to idle and cruise properly. | |
| - | | **Dash gauge display**| ✔ | ✔ |Change the factory boost gauge display to show whatever you want.| | + | | **Extended fuel and timing tables** | | |You can run outside these ranges. You just won't have individual adjustment points. | |
| - | | **TPS adjustments/dial-in**| ✔ | ✔ |Automatic TPS calibration.| | + | | //8000 RPM & 23psi// | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | |Extended fuel and timing tables - V3Lite | |
| - | | **Idle switch simulation**| ✔ | ✔ |Simulates the idle switch for less hassle and more functionality when running throttle bodies that lack this feature.| | + | | //10000 RPM & 35psi// | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Extended fuel and timing tables - full V3 | |
| - | | **Narrowband O2 simulation**| ✔ | ✔ |Run normal closed loop operation using your wideband. This frees up inputs to the ECU for logging other things, like manifold pressure.| | + | | **Speed Density** | | |You can run outside these ranges. You just won't have individual adjustment points. A good starting point for setting up SD can be found on our [[:sdsetup|SD Setup page]]. | |
| - | | **Anti-lag**| ✔ | ✔ |Quick spool the turbo off the line by retarding ignition when launching or shifting gears.| | + | | //8000 RPM & 26psi// | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | |Speed Density support - V3Lite | |
| - | | **Knock sensor control**| ✔ | ✔ |Work around phantom knock by defining the operating conditions under which the knock sensor is utilized.| | + | | //10000 RPM & 40psi// | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Speed Density support - full V3 | |
| - | | **Solenoid tests**| ✔ | ✔ |One-click tests of each solenoid output.| | + | | **Airflow compensation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |To help fine tune your fuel trims under varying driving conditions. | |
| - | | **Fan control, fuel pump control, etc.**| ✔ | ✔ |Enable fans full time (not available on the 1G) or fuel pump.| | + | | **Selectable Mitsubishi MAS** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run a 1G DSM, Galant VR4, 2G DSM, or EVO8/3G MAS. | |
| - | | **DTCs (check engine codes)**| ✔ | ✔ |Check engine diagnostic codes.| | + | | **Engine speed limits** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |The "standard" RPM limits (rev limiter, launch stutterbox, no lift to shift). | |
| - | | **Log aftermarket sensors**| ✔ | ✔ |Log any number of aftermarket sensors, including boost sensors, air temp sensors, fuel pressure sensors and wideband kits.| | + | | **Torque calculation inside the ECU** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Best possible torque calculation using all the data immediately available inside the ECU. This effectively utilizes information from every single firing event. | |
| - | | **Throttle tip-in adjustments**| ✔ | ✔ |Tweak the "snap throttle" response.| | + | | **Dash gauge display** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Change the factory boost gauge display to show whatever you want. | |
| - | | **Open loop thresholds**| ✔ | ✔ |Run closed loop with more or less throttle and under more or less load, as you want.| | + | | **TPS adjustments/dial-in** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Automatic TPS calibration. For more details, see the [[:v3tpsadj|TPS Adjust page]]. | |
| - | | **Native GM MAF support**| | ✔ |Run a GM MAF sensor directly into the ECU using our cable! No GM MAF translator device required.| | + | | **Idle switch simulation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Simulates the idle switch for less hassle. Just use the [[:v3tpsadj|Auto TPS Adjust]] function and then check the simulate idle switch checkbox. That's all there is to it. | |
| - | | **Switchable secondary maps**| | ✔ |Switch in a second set of maps based on a set of criteria you define or based on a switch connected to the ECU.| | + | | **Narrowband O2 simulation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run normal closed loop operation using your wideband. This frees up inputs to the ECU for logging other things, like manifold pressure. Complete details can be found on the [[:v3narrowbandsim|Narrowband simulation page]]. | |
| - | | **Secondary fuel (more than 4 injectors)**| | ✔ |Run more than 4 injectors and switch them on only when needed. Automatically scales injector output accordingly.| | + | | **Anti-lag** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Quick spool the turbo off the line by retarding ignition when launching or shifting gears. | |
| - | | **Output controls (nitrous, water injection, etc.)**| | ✔ |Control your nitrous kit or water injection or any number of other things using a set of parameters you define.| | + | | **Knock sensor control** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Work around phantom knock by defining the operating conditions under which the knock sensor can be ignored. | |
| - | | **Auto-scaled, RPM-based fuel adjustments**| | ✔ |Make quick and easy "3D" adjustments by letting the ECU do the work for you.| | + | | **Solenoid tests** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |One-click tests of each solenoid output. | |
| - | | **Simplified RPM-based timing controls**| | ✔ |Make a few quick tweaks to timing before you go into the full 3D table and adjust the cells individually.| | + | | **Fan control, fuel pump control, etc.** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Enable fans full time (not available on the 1G) or fuel pump. | |
| - | | **Idle air simulation**| | ✔ |Works around that annoying stall when coming to a stop or pressing the clutch pedal in.| | + | | **DTCs (check engine codes)** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Check engine diagnostic codes. | |
| + | | **Log aftermarket sensors** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Log any number of aftermarket sensors, including boost sensors, air temp sensors, fuel pressure sensors and wideband kits. [[:installnewsensor|This page]] is a good starting point for more information. | | ||
| + | | **Throttle tip-in adjustments** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Tweak the "snap throttle" response. | | ||
| + | | **Open loop thresholds** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run closed loop with more or less throttle and under more or less load. Useful when you want to maintain closed loop operation above 80mph on a 1G, for example, or idle in open loop but cruise in closed loop or just to extend the areas where you collect closed loop data for dialin. | | ||
| + | | **Auto MAF compensation** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |An [[:v3mafadjcombft|extremely useful tool]] for getting those fuel trims inline quick and easy. Automatically dials in MAF compensation for you. | | ||
| + | | **Auto-scaled, RPM-based fuel adjustments** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Make quick and easy "3D" adjustments by letting the ECU do the work for you. | | ||
| + | | **Simplified RPM-based timing controls** | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Make a few quick tweaks to timing before you go into the full 3D table and adjust the cells individually. | | ||
| + | | **Native GM MAF support** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run a GM MAF sensor directly into the ECU using our cable! No GM MAF translator device required. Our cable with the [[:v3mafadjcombft|auto MAF adjustment tool]] makes dialing in a GM MAF sensor cake work. | | ||
| + | | **Hot start enrichment** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |ECMLink provides an enrichment function when the engine is started while hot. If you find that you need this function because your engine seems to run lean when started hot, then check this box. | | ||
| + | | **MAF sensor simulation** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Allows you to run a nice, smooth factory MAF for all your idle and cruise functions and then switch to pseudo SD when the MAF sensor is about to over run. This function basically disables the MAF under high boost and simulates and extrapolates airflow automatically. | | ||
| + | | **Switchable secondary maps** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Switch in a second set of base timing and fuel maps. Can be activated manually with a switch on the dash or automatically based on criteria you define. | | ||
| + | | **Secondary fuel compensation** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Run more than 4 injectors or switch between different fuels (e85 and gasoline, for example). Can be activated manually with a switch on the dash or automatically based on criteria you define. | | ||
| + | | **Programmable output controls** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Control your nitrous kit or water injection or any number of other things using a set of parameters you define. | | ||
| + | | **Idle air simulation** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Works around that annoying stall when coming to a stop or pressing the clutch pedal in. Can also be used to run a vented blow off valve with a factory mass air sensor. | | ||
| + | | **Individual deadtime control** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Adjust the deadtime of each injector individually. Makes for smoother idle and better fuel control at cruise with large injectors. | | ||
| + | | **High resolution deadtime** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Nearly four times the resolution in deadtime control compared to factory. Further improves idle quality and possibly mileage too! | | ||
| + | | **Gear-based boost control** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Full [[:boostcontrol|boost control]] functionality with gear-based operation. | | ||
| + | | **Flex-fuel sensor operation** | | {{https://www.ecmtuning.com/images/checkmark.gif?direct&}} |Supports running a GM-style flex fuel sensor to automatically adjust for ethanol content of your fuel. Fill up with E85 or top-off with gasoline...it won't matter. And you can define two separate tunes for two different points on the ethanol curve and let the ECU interpolate between them. | | ||
| + | |||
| + | |||
| + | \\ | ||
prodcompare.1263418566.txt.gz · Last modified: 2010/01/13 16:36 by twdorris
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
